|Photo credit: String Theory by Michael Krigsman|
The endless succession of failed projects forces one to question why success is elusive, with an extraordinary number of projects tangling themselves in knots. These projects are like a child’s string game run amok: a large, tangled mess that becomes more convoluted and complex by the minute.
IT projects fail all the time. Business blames IT, IT blames the system integrator (SI), who then blames the software vendor. After all this blaming and shaming, everyone goes back to work on another project without examining the project management methods and processes that caused the failure. And, so, they fail again.
There’s no one definition of design thinking. It’s a mindset and set of values that applies both analytical and creative thinking towards solving a specific problem. Design thinking is about how you think and not what you know; it is about the journey and not the destination.
Having followed Michael Krigsman’s analysis of IT project failures, it became evident that design thinking can play an important role in improving enterprise software development and implementation.
The design thinking approach offers a means to address the underlying causes of many project failures — poor communication, rigid thinking, propensity toward tunnel vision, and information silos.
I have distilled important lessons from design thinking into six principles that can help stop project failures. Along the way, we will draw comparisons with Agile development, since that distinction is often a source of confusion when discussing design thinking.
These six principles, based on design thinking, can help any project team operate more successfully.
1. Put a multi-disciplinary team in charge
You can’t pin down project failure on one person or one topic and yet we continue to use a person-centric method to manage projects. No one on a project team wants to fail. If you collectively put responsibility of the failure or success on the shoulders of the team and get them trained and motivated to think and behave differently you will mitigate much failure.
Multidisciplinary teams champion the user, business, and technology aspects of a project in a more comprehensive manner than would otherwise be possible. Typically, an IT team talks to business stakeholders who then talk to end users, which creates communication gaps, delays, and inefficiency. Far better to create a single team that includes participants from all areas, creating a single unit that includes multiple perspectives.
Try to staff your project team with “T-shaped” people, who possess a broad understanding and empathy for all the IT functions, but who also have deep expertise in one domain to champion that perspective. This approach can ensure that your solution is economically viable, technologically feasible, and delights the end users. A more balanced team also humanizes the project and its approach. Stay small and resist the temptation to set up very large teams. If you believe the “two-large-pizza-team” rule, those projects are team-driven and tend to be more successful. Start-ups can build something quicker because they are always short on people. As your group get bigger and bigger, other people tell you what to do and team members feel less connected to their work as it relates to the outcome.
2. Prepare for failure in the beginning
I recommend kicking off the project with a “pre-mortem workshop.” Visualize all the things that could go wrong by imagining that the project has failed. This gives the team an opportunity to proactively look at risks and prepare to prevent and mitigate them. I have sat through numerous post-mortem workshops and concluded that the root causes of failures are usually the same: abstract concepts such as lack of communication, unrealistic scope, insufficient training, and so on. If that’s true, why do we repeat the same mistakes, causing failure to remain a common situation? Primarily because many people find it hard to imagine and react to abstractions, but can relate much better when these concepts are contextualized into their own situation.
3. Be both vision- and task-driven
Design thinking emphasizes storytelling, shared vision, and empathy towards all stakeholders involved in a project. On many projects, participants focus exclusively on their own individual tasks, thus becoming disconnected from the big picture.
While design thinking strives to connect participants to the larger vision, Agile development can be very task-driven. Everyone gets a task without necessarily understanding the big picture, or vision, or even seeing the connection between his or her tasks and the final outcome. In this situation, a project can fail and people may not understand their role, thinking they failed due to someone else’s work. If participants don’t realize their tasks contributed to a failure, they won’t try to learn and change.
On the other hand, vision-driven approaches are very powerful. People perform their tasks, but the story and vision persist throughout the project; the same story gets told by different people throughout the lifecycle of the project to avoid that big picture fading away. All the tasks have a bigger purpose beyond their successful execution. Even good project managers miss this point. At review meetings, it is important to evaluate what the team did right but also revisit the vision and examine how recent outcomes fit the overall story.
4. Fail and correct then fail again
Design thinking contradicts other methodologies that focus only on success. In design thinking, failing is not necessarily a bad idea at all; however, we fail early and fail often, and then correct the course. In many projects, people chase success without knowing what it looks like or expecting to fail; therefore, they do not learn from the process.
One of the challenges with traditional project management is the need to pick one alternate and run with it. Turns out that you don’t know everything about that alternative and when it fails, due to the irreversible decision that you made, you can’t go back. Far better to iterate on a number of alternatives as fast as you can before deciding which one will work. This approach requires a different way of thinking and planning your project.
5. Make tangible prototypes
Agile proposed creating unstructured documentation as opposed to making structured requirement documents. But, unfortunately, that is not enough to solve many problems. One of the core characteristics of design thinking is to prototype everything, to make a tangible artifact and learn from it. The explorative process of making prototypes makes people think deeply and ask the right kind of questions. It’s said that “computers will never give a wrong answer but it will respond to a wrong question.” The prototypes encourage people to focus on what I want to know as opposed to what I want to say. This is very important during the initial design phase of the project.
One of the biggest misconceptions about prototypes is that people think they are too complex to make and are overhead or a waste of time. This isn’t true at all. Prototypes can be as simple as a hand-drawn sketch on a paper or as complex as fully functional interactive interface. The fidelity of a prototype is based on what kind of questions you want answered. People tend to fill in gaps when they see something raw or incomplete whereas hi-fidelity prototypes can be too complete to solicit meaningful feedback. As I already mentioned, most people respond better to an artifact as opposed to an abstract document. Prototypes also make the conversation product-centric and not person-centric. They also help to get team members on the same page with a shared vision.
6. Embrace ambiguity
One of the problems with traditional project management methodologies is that they make people spend more time in executing the solution and less time on defining the problem. Design thinking encourages people to stay in the problem space as long as they can. This invariably results in ambiguity, which is actually a good thing.
Ambiguity fosters abductive thinking — a mindset that allows people to explore what is probable with the limited information on their hands without concerns about proving or concluding that it actually works. It helps people define a problem in many different ways, eventually letting them get to the right problem they eventually should focus on.
This also supports the emergent approach that design thinking advocates as opposed to a hypothesis-driven approach. In a hypothesis-driven environment, people tend to focus on proving a premise created by a small group people. Rushing to a solution without defining the problem, and having no emergent framework in place to include the insights gained during later parts of the project, certainly contributes to failure.
ORGANIZATIONAL BARRIERS TO SUCCESS
Even the best methodology requires organizational commitment to success. For design thinking to work, it is also necessary to address these common organizational issues, each of which can impede progress and limit successful outcomes.
Lack of C-level commitment: Although design thinking is applicable at all levels in an organization, executive management must bless it by publicly embracing and practicing design thinking. Top down initiatives and training only go so far.
When the employees see their leaders practice design thinking they are more likely to embrace and practice it themselves. The same is true with adoption of social media and collaborative tools inside an organization. The best signal to your employees is by showing them a firm belief in the method by practicing it firsthand and sharing positive outcome.
Resistance to change: People in any organization are usually fundamentally against change, even if they believe it’s a good thing. They don’t want to get out of their comfort zone and therefore practice the same methods that have resulted in multiple failures in the past. Changing behavior is difficult but fortunately design thinking can help.
One of the ways I have taught design thinking is by taking people away from their primary domain and have them solve a very different kind of problem such as redesigning a ticket vending machine or a fast food restaurant. My team was hugely successful since it was a completely different domain and it didn’t interfere with their preconceived notion of how a project should be executed. People’s reservations are tied to their domain; they are willing to adopt a new method and new way of thinking if you coach them outside of their domain and then encourage to practice it in their comfort zone.
Lack of industry backing: Despite being informal, undocumented, and non-standards-based methodology, Agile experienced widespread adoption. I would attribute this success to two things: a well-defined manifesto by lead industry figures and organizations publicly committing to adopt the methodology. Design thinking lacks these attributes.
Even though industrial design companies such as IDEO has evangelized this approach, there’s still confusion around what design thinking actually means. This also makes it difficult to explain design thinking to a wider audience. If a few organizations publicly endorse design thinking, create a manifesto, and share the best practices to gain momentum, many of the adoption hurdles will go away.
Lack of key performance indicator (KPI) frameworks: Design thinking faces the same challenge that most Enterprise 2.0 tools face: lack of measurable KPIs.
For number-driven leaders, lack of a quantifiable framework to measure and monitor the impact of a new methodology is a challenge. Some leaders are good at adopting new ways of doing things and others are not. In these cases, isolate a project that you can’t measure and start small. Contain the risk but pick a project that has significant upside, to keep people engaged and motivated. You may still fail, or not achieve a desired outcome, but that’s what the design thinking is all about.
It’s worth noting that Agile, as a software project methodology, has well defined quality and reliability KPIs such as beta defects, rejected stories during a scrum cycle, and the delta between committed and delivered stories.
Fail early and course correct the next time. Remember that adoption and specific practice need correction and not the method itself. Don’t give up.
During my extensive work on design thinking - practicing, coaching, and analyzing — I often talk with people who believe that design thinking is merely a methodology or approach for “visual design.” This view is a false perception. Design thinking comprises a set of principles one can apply during any stage of the enterprise project lifecycle along with other project management methodologies. This approach is valid for the CEO and executive management all the way to the grass roots.
Another common point of confusion is the distinction between design thinking and Agile methods of software development. The primary difference is that Agile offers a specific set of prescriptive processes while design thinking encapsulates a set of guidelines and general principles. Although not the same, the two approaches are highly complementary (even on the same project), because both recognize the benefits of using iterative work cycles to pursue customer-centric goals.
Always remember that real people work on every project. The best methodologies are inherently people-centric and help participants anticipate likely causes of failure. Visualizing failure early in a project is an excellent means to prevent it from occurring. We’re all human and may make mistakes but certainly no one wants to fail.
Design thinking can make potential failure a learning tool and not a final outcome.
I had originally published this post as a guest blog post on Michael Krigsman's IT Project Failures blog